Oil Painting Wet-into-Wet (Part 1)

Oil Painting Wet-into-Wet (Part 1)

with 5 Comments

Oil painting can easily become a complicated endeavor. There are so many mediums, solvents and oils on the market that it can be hard to know which ones you actually need. Of course, they can all be useful in particular circumstances. But if you like to keep things simple like I do, oil painting wet-into-wet is a great solution.

Oil Painting Wet-into-Wet

Oil painting wet-into-wet avoids the need for most mediums. It’s just what it sounds like — the paint is not allowed to dry during the painting process. From start to finish, the paint is applied wet from the palette directly onto the wet painting.

There are different methods for managing this on larger-scale works, but more on that later. For now, the point is that in order to paint with oils, you need only one addition to your tubes of paint:

Thinner.

Oil paint can be somewhat stiff out of the tube. So it’s helpful to have some kind of thinner to make the paint more workable.

I use one of two thinners: either a solvent or an oil. The solvent I like is Gamsol (odorless mineral spirits made by Gamblin). The oil I prefer is walnut oil (I get it from M. Graham). Both are useful for thinning paint and for cleaning brushes. The added benefit of walnut oil is its non-toxicity. I avoid linseed oil because of its tendency to yellow over time. (See my post about that.)

Oil painting wet-into-wet has some definite benefits.

  • Edges and shapes throughout the painting can be easily manipulated since they are all wet and workable.
  • The need to repaint dry, unfinished sections is eliminated because areas are completed before they dry.
  • All parts of the painting dry together in unison, maintaining an even surface sheen in the finished work. (Flat “dead spots” caused by painting wet paint on top of dry are avoided.)
  • No need to rely on the application of varnish to create an even surface sheen. (Although it’s still advisable to apply it as a protective layer.)
  • Paintings are completed more quickly, meaning that losing interest is less likely.

In Part 2, we’ll talk about the process of oil painting wet-into-wet and how you can use it to your advantage.

For more of my posts about keeping things simple, check out the following: Choice of brushes. Palette setup. Limited colors.

5 Responses

  1. Juliana Tillman
    | Reply

    Thanks for posting your blog. Even though some of us may know these things it’s always a nice reminder to get back to the basics and read about your process. Losing all that extra folderol that comes with painting. I look forward to your next post. Glad your safe from fire and flood.
    Take care

  2. Liz Todd
    | Reply

    Hi Dan, Keeping things simple sounds – well, so simple…. And a good idea. I appreciate your posts and your generous sharing of painting tips. Question: Do you varnish your paintings? If so, do you wait 6 months for them to dry completely? Spray, or brush on? I second the above comment – glad you are safe from fire and flood. Wow !
    Your paintings arrived here in N. Cal safe and sound. Very happy to have them here.
    best,
    Liz

    • Dan Schultz
      | Reply

      Hi Liz,

      Glad to hear that you and my paintings made the trip safely. 🙂 I do varnish my paintings….sometimes…. I need to be more consistent with it though. I use Gamvar (made by Gamblin). Lately, I’ve been liking Gamvar Matte since I’m not a big fan of glossy varnish. Gamblin recommends varnishing after a painting is dry to the touch. You shouldn’t be able to press your fingernail into thicker areas of paint. So usually just a few weeks of waiting for most paintings, unless you paint really thick. You can find out more about it on Gamblin’s website.

  3. Liz Todd
    | Reply

    Thanks Dan !
    I’m happy to hear that Gamblin says dry to the touch. It will be helpful to learn more; thanks for the tip
    on visiting their site. I have heard 6 months wait before final varnish. Which I’ve done. So many learning curves!

Leave a Reply